{"product_id":"minelab-ml100-bluetooth-headphones","title":"Minelab ML100 Bluetooth Headphones for GPX 6000, Equinox 600\/800 and Vanquish 540","description":"\u003cp\u003eThe ML100 is Minelab's over-ear Bluetooth headphone, the full-cushion option for the GPX 6000, Equinox 600 and 800, and Vanquish 540. Out on a windy goldfield with a GPX 6000, the difference between on-ear and over-ear is the difference between hearing a faint threshold shift and losing it to the weather.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a glance:\u003c\/strong\u003e The Minelab ML100 (part 3011-0435) is an over-ear Bluetooth aptX Low Latency headphone for the Minelab GPX 6000, Equinox 600 and 800, and Vanquish 540. It runs 15 to 20 hours per charge, weighs 9.5 oz \/ 270 g, pairs with two devices at once, and includes a locking 3.5 mm wired backup cable.\u003c\/p\u003e\n\u003ch2\u003eWhy the ML100\u003c\/h2\u003e\n\u003cp\u003eFull ear coverage is the working reason to choose it. The cushions surround the ear and shut out wind, brush, and highway noise, which matters most on the quiet, deep targets a GPX 6000 is bought for. Under the cups it runs aptX Low Latency Bluetooth on the CSR8670 chipset, the fast codec Minelab's Bluetooth detectors are tuned for, so target response stays tight to the swing. Like the ML80 it pairs with your detector and your phone at the same time, and its aux cable locks with a quarter turn so wired backup cannot snag loose. Most dealer pages for this model run under a hundred words and one of them still calls the machine a \"GPX 600\"; the numbers below are Minelab's manual, doc 4901-0398-2.\u003c\/p\u003e\n\u003ch2\u003eSpecs that matter in the field\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eWhat it means for your hunt\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOver-ear, 9.5 oz \/ 270 g\u003c\/td\u003e\n\u003ctd\u003eBlocks wind and outside noise; comfortable through multi-hour goldfield sessions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBluetooth aptX Low Latency (CSR8670)\u003c\/td\u003e\n\u003ctd\u003eThe codec the GPX 6000 and Equinox 600\/800 expect; beep stays with the coil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15-20 hr operating, up to 180 hr standby\u003c\/td\u003e\n\u003ctd\u003eWeekend-long hunts on a 3 hr charge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDual-device pairing\u003c\/td\u003e\n\u003ctd\u003eDetector plus phone together in remote country\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLocking 3.5 mm aux cable\u003c\/td\u003e\n\u003ctd\u003eQuarter-turn lock; wired mode for a flat battery or non-Bluetooth gear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eCompatibility, stated plainly\u003c\/h2\u003e\n\u003cp\u003eWorks with: the \u003ca href=\"\/products\/minelab-gpx-6000-metal-detector\"\u003eMinelab GPX 6000\u003c\/a\u003e, Equinox 600 and 800, and \u003ca href=\"\/products\/minelab-minelab-vanquish-540-pro-pack-metal-detector\"\u003eVanquish 540\u003c\/a\u003e, plus phones and other standard Bluetooth devices.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eYour detector\u003c\/th\u003e\n\u003cth\u003eML100 compatible?\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEquinox 600\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEquinox 800\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVanquish 540\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGPX 6000\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhones, tablets, Bluetooth devices\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVanquish 460 \/ 560\u003c\/td\u003e\n\u003ctd\u003eNo, their Bluetooth is LE Audio with the LC3 codec, which the ML100 does not support; use LE Audio headphones such as the ML60 earbuds, or the wired jack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManticore\u003c\/td\u003e\n\u003ctd\u003eNo, use the ML85 or ML105 low latency wireless headphones\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEquinox 700\u003c\/td\u003e\n\u003ctd\u003eNo, use the ML85 or ML105 low latency wireless headphones\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEquinox 900\u003c\/td\u003e\n\u003ctd\u003eNo, use the ML85 or ML105 low latency wireless headphones\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eX-Terra Pro\u003c\/td\u003e\n\u003ctd\u003eNo, use the ML85 or ML105 low latency wireless headphones\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eX-Terra Elite\u003c\/td\u003e\n\u003ctd\u003eNo, use the ML85 or ML105 low latency wireless headphones\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDC 2300\u003c\/td\u003e\n\u003ctd\u003eNo, use the wired ML100 SDC set (part 3011-0417)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eNot compatible with: Equinox 700 or 900, X-Terra Pro or Elite, or the Manticore. Those are not Bluetooth detectors; they take the Minelab ML85 or ML105 low latency wireless headphones. For the SDC 2300, which has no Bluetooth at all, Minelab builds a wired ML100 set with a dedicated SDC connector cable.\u003c\/p\u003e\n\u003ch2\u003eWhat's included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eML100 Bluetooth headphones\u003c\/li\u003e\n\u003cli\u003eDetachable locking 3.5 mm aux cable\u003c\/li\u003e\n\u003cli\u003eUSB charging cable\u003c\/li\u003e\n\u003cli\u003eInstruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHonest limits\u003c\/h2\u003e\n\u003cp\u003eThe ML100 is not waterproof, and it charges over USB micro-B rather than USB-C, so keep its cable in the kit bag.\u003c\/p\u003e\n\u003cp\u003eHistory Seekers is a small American business and an authorized Minelab dealer. Everyone here detects, top down, for gold, relics, coins, jewelry, and float copper; prior field experience is a hiring requirement, not a coincidence. The person answering your question may be the one packing your order for the UPS drop-off, and your purchase keeps everyday Americans working. The story is more important than the artifact.\u003c\/p\u003e","brand":"Minelab","offers":[{"title":"Default Title","offer_id":48138502177026,"sku":"3011-0435","price":160.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/9012\/8130\/files\/minelab-ml100-bluetooth-headphones.png?v=1784391554","url":"https:\/\/historyseekers.net\/products\/minelab-ml100-bluetooth-headphones","provider":"History Seekers Metal Detectors","version":"1.0","type":"link"}