Minelab Pro-Find 40 Pinpointer


Price:
Sale price$149.00
Availability:
In stock
Delivery:
Ships in 0 to 1 business day, arrives in 2 to 5 business days in the contiguous US. Shipping policy
Questions:
Call 256-284-2247 and talk to someone who runs this gear. Authorized dealer.

Authorized Minelab dealer. The manufacturer's warranty applies.

Description

The plug is out, the detector says the coin is still in the hole, and the pinpointer you bought to settle it is chattering at the red clay instead. The Minelab PRO-FIND 40 was built for that hole. Five sensitivity levels let you turn it down until the chatter stops, a Rapid Re-tune button resets it against the ground you are actually in, and Ferrous Tone ID tells you with two tones whether the thing at the tip is a nail or a coin before you pull it out. It is waterproof to 3 m (10 ft), runs on one ordinary 9V battery for up to 20 hours, and Minelab's DIF technology keeps it from falsing your detector while it rides holstered and switched off. Minelab rates it at up to 10% more depth than its earlier pinpointers and calls it its deepest and most accurate PRO-FIND. For a Minelab owner, this is the probe that matches the machine.

At a glance

The Minelab PRO-FIND 40 is a waterproof VLF pinpointer with Minelab's DIF (Detector Interference Free) technology. Adjustable sensitivity, 5 levels; Ferrous Tone ID (dual tone audio); Rapid Re-tune at a button press; audio and vibration that intensify toward the target, each switchable; LED flashlight; inactive (lost) alarm with auto power-off; waterproof to 3 m (10 ft); 24.7 cm (9.7 in) long; 188 g (6.6 oz) without battery, 234 g (8.3 oz) with; one 9V PP3 battery, included, up to 20 hours; high-visibility red grip; semi-rigid belt holster and lanyard included. Works beside any brand of metal detector. 2-year (24 month) Minelab warranty. Minelab's current pinpointer line is PRO-FIND 15, 35 and 40; this is the top of it.

Why the PRO-FIND 40, and who it is for

Pinpointers fail in two ways: they false against the ground, and they false against your detector. Minelab answered the first with controls, and the second with DIF. Five sensitivity levels and the Rapid Re-tune button handle mineralized soil, wet sand and trashy plugs; you set the probe for the hole in front of you instead of living with a factory setting. DIF disengages the probe's magnetic field when it is switched off, so a PRO-FIND 40 on your belt does not make your coil chirp every time it swings past (that is the exact behavior Minelab describes, and it is why the probe only needs to be off, not left in the truck). Ferrous Tone ID is the third answer, to a problem most pinpointers ignore: it gives iron a different tone from non-ferrous metal at the tip, so you decide whether the bottom of the hole is worth another minute.

It is for the detectorist who runs any brand of machine and digs in real ground: parks with a century of iron, beaches and creeks where the probe goes under, gold country where small targets hide in hot soil. Minelab owners get the matched probe; it is the pinpointer Minelab packs into its own bundles, and it is in ours too: the MANTICORE Pro Pack, the EQUINOX 900 Field Bundle and the X-TERRA ELITE Expedition Bundle each ship with a PRO-FIND 40. If you want the same features at a lower price and can live without the extra depth, the re-tune button and the louder alert, the PRO-FIND 35 is the sibling; the table below draws the line.

The controls, from Minelab's Getting Started Guide

Three buttons on the red grip: power, plus and minus. The guide (part 4901-0485-1, in the box) is a pictogram sheet, and the whole machine fits on it:

  • Sensitivity: plus and minus step through the five levels. Start in the middle; go down when the probe chatters in mineralized ground, up when you are hunting small or deep targets in clean soil.
  • Rapid Re-tune: a button press resets the probe against the current ground. Use it when soil changes, when a large target makes the probe sing before the tip is near it, and on wet salt sand.
  • Audio and vibration: both intensify as the tip closes on the target; the audio can be switched off for a silent, vibration-only hunt (a short hold on the button, per the guide).
  • Ferrous Tone ID: a 3-second hold enables ferrous audio; from then on iron gives one tone and non-ferrous metal another. Another 3-second hold disables it.
  • LED flashlight: lights the bottom of the hole at dusk and under tree cover.
  • Inactive alarm: leave it switched on and idle and it sounds an alert after 3 to 5 minutes, then powers itself off after about 5 more; the red grip is there for the same reason. Factory reset is a 6-second hold.
  • Maintenance: the guide's only service line is the one that matters for a waterproof probe: keep the battery-cap threads and the O-ring clean, and lubricate the O-ring with silicone grease from time to time.

Technical specs and what they mean in the hole

Spec (minelab.com PRO-FIND 40 page and Tech Specs, 2026) What it does in the field
VLF detection with DIF (Detector Interference Free) technology Continuous single-frequency detection at the tip; DIF kills the probe's field when it is switched off, so it rides on your belt without falsing your detector.
Up to 10% increased depth performance (Minelab's figure) Minelab's deepest PRO-FIND: more reach into the wall of the hole before you widen it.
Sensitivity adjustable, 5 levels; Rapid Re-tune Turn it down in iron and hot soil, up for small gold; re-tune when the ground changes.
Ferrous Tone ID (dual tone audio) Iron sounds different from a coin at the tip; fewer nails pulled out of good holes.
Audio and vibration indication, each switchable; LED flashlight Loud in the open, silent on a quiet beach, visible at dusk.
Waterproof to 3 m (10 ft) Creeks, the surf line, wading with a waterproof detector; rinse after salt.
24.7 cm (9.7 in); 188 g (6.6 oz) without battery, 234 g (8.3 oz) with Rides in the included semi-rigid holster on any belt.
9V PP3 battery, included; up to 20 hours No charger, no cable: a spare 9V from any store gets you hunting again.
Inactive alarm and auto power-off; high-visibility red grip A probe set down in the grass announces itself and then saves its own battery.
Included: holster, lanyard, 9V battery, Getting Started Guide Everything to hunt the first day.
2-year (24 month) Minelab warranty Register it with Minelab; service through Minelab's authorized centers.

PRO-FIND 35 vs 40 (and the 15): which Minelab pinpointer do you need?

Model What you get (Minelab pages and guides) Buy it if
PRO-FIND 40 (this listing) 5 sensitivity levels, Ferrous Tone ID, Rapid Re-tune, up to 10% more depth, louder audio alert, vibration, LED, inactive alarm, DIF, waterproof 3 m (10 ft), red high-visibility grip, 9V up to 20 h, holster and lanyard You dig in iron, mineralized ground or wet sand and want the deepest, most adjustable PRO-FIND; you run a Minelab or any other detector.
PRO-FIND 35 5 sensitivity levels, Ferrous Tone ID, vibration, LED, lost alarm, DIF, waterproof 3 m (10 ft), 9V up to 20 h, holster and lanyard; no Rapid Re-tune, no 10% depth claim You want the same waterproof rating and tone ID at a lower price and hunt mostly clean ground.
PRO-FIND 15 Fixed sensitivity, audio only, waterproof 1.5 m (5 ft), DIF; no vibration, no LED, no lost alarm; holster only, battery not included You want the least expensive Minelab probe for dry-land use and will not put it under water.

The short version: the 35 and the 40 share the waterproof rating, the five levels and the tone ID; the 40 adds the re-tune button, the depth and the louder alert, which is what you pay for. Both work with any detector brand.

Know before you buy

The PRO-FIND 40 is a pinpointer, not a detector: there is no target ID screen and no depth readout, and Minelab publishes no detection-distance figure for it; its job is the last few inches, and the five sensitivity levels plus Rapid Re-tune are how you make it precise. DIF works when the probe is switched OFF; a pinpointer that is switched on next to a running detector will interfere like any other, so switch it on when the hole is open. The 3 m (10 ft) rating is for wading, creeks and the surf, not diving, and the O-ring under the battery cap is the seal that keeps it waterproof: keep the threads clean and the ring greased, and dry the cap before you open it after salt water. The battery is a standard 9V, not a rechargeable pack; Minelab's 20-hour figure is a maximum, and the LED and vibration both draw it down faster.

What comes in the box

  • Minelab PRO-FIND 40 pinpointer
  • Semi-rigid belt holster
  • Lanyard
  • 9V PP3 battery
  • Getting Started Guide (4901-0485-1); 2-year (24 month) Minelab warranty

Minelab's guide and documents for this model are on Minelab's own downloads page: PRO-FIND 40 product downloads at minelab.com. The PRO-FIND 40 has no firmware to update.

Frequently Asked Questions

Does the Minelab PRO-FIND 40 interfere with my metal detector?

Not while it is switched off on your belt. Minelab's DIF (Detector Interference Free) technology disengages the pinpointer's magnetic field when it is off, which is what stops a holstered probe from falsing the search coil as it swings past. Switch it on once the plug is out. A pinpointer that is running next to an operating detector will still be heard by the coil, on any brand.

PRO-FIND 35 vs 40: which Minelab pinpointer should I buy?

Both are waterproof to 3 m (10 ft), both have five sensitivity levels, Ferrous Tone ID, vibration, an LED, a lost alarm and DIF, and both run about 20 hours on a 9V. The PRO-FIND 40 adds Minelab's up-to-10% depth increase, the Rapid Re-tune button, a louder audio alert and the red high-visibility grip. Choose the 40 for iron-heavy, mineralized or wet-sand sites where re-tuning and depth matter; choose the 35 to save money on cleaner ground. Either works with any detector brand.

Can the PRO-FIND 40 tell iron from a coin?

At the tip, yes. Ferrous Tone ID gives ferrous metal one tone and non-ferrous metal another, so a nail at the bottom of the hole sounds different from a coin or a ring. It is a two-way call, not a target ID number; it does not replace your detector's discrimination, it saves you the last dig on obvious iron. Enable it with a 3-second hold per the Getting Started Guide.

What battery does the PRO-FIND 40 use, and how long does it last?

One standard 9V PP3 battery, included in the box, for up to 20 hours per Minelab. It is not rechargeable, so there is no charger or cable to lose; keep a spare 9V in the holster pocket. The LED flashlight and vibration both shorten the run, so switch off what you are not using. Low battery and the inactive alarm both auto-power the probe off to protect the cell.

Why does my PRO-FIND 40 keep beeping in mineralized ground, and how do I stop it?

Hot soil, wet salt sand and a big target near the probe all raise the ground response. Two tools: lower the sensitivity with the minus button (five levels), and press Rapid Re-tune with the tip held in the hole so the probe resets against that ground. If it still chatters, drop another level; precision at the tip matters more than reach in a trashy plug.

How deep can a pinpointer detect, and how is it different from a metal detector?

A pinpointer is a short-range probe for the last few inches: your metal detector finds and identifies the target under the coil; once the plug is out, the pinpointer finds the exact spot in the hole or in the plug so you stop digging. Minelab publishes no detection-distance figure for the PRO-FIND 40; its reach depends on target size and the sensitivity level, and Minelab's claim is relative, up to 10% more than its earlier pinpointers. It does not replace a detector.

Is the PRO-FIND 40 waterproof, and what warranty does it carry?

Waterproof to 3 m (10 ft) per Minelab's tech specs, for creeks, the surf line and wading with a waterproof detector; it is not a dive accessory. Keep the battery-cap O-ring clean and greased, and rinse the probe in fresh water after salt. It carries Minelab's 2-year (24 month) warranty. History Seekers Metal Detectors is an authorized Minelab dealer, and returns follow our refund policy; call 256-284-2247 if you are deciding between the 35 and the 40.

Who you are buying from

History Seekers is a small American business and a working detecting channel: over 1.1 million people follow our hunts on Facebook and YouTube. Everyone here detects, from the top down: gold, relics, coins, jewelry, even float copper. We run Minelab machines with PRO-FIND probes on the belt, and the person who answers your call has re-tuned one in red clay. Every purchase keeps everyday Americans working.

History Seekers Metal Detectors is an authorized Minelab dealer; every PRO-FIND 40 we sell is new and carries the full 2-year (24 month) Minelab warranty. Call 256-284-2247 if you are deciding between the PRO-FIND 35 and the 40, or which probe fits your detector; we will tell you straight. Because at History Seekers, the story is more important than the artifact.

You may also like

Recently viewed

  • 5 stars: 1 (50%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 1 (50%)
  • 1 star: 0 (0%)
V
Vonda Helton

Very happy with my pinpointer, it works great with my Manticore! Operator friendly and accurate! Thank you History Seekers for the recommendation!😊

A
Anonymous

This pinpointer is not as good as advertised in my opinion. It was not as sensitive nor as reliable as the Garrett AT Pro (Garrett Carrot). Think Minelab should do more research and development on this product.

Hi there, thank you for sharing your feedback. We're sorry to hear the Pro-Find 40 didn't meet your expectations. If you have any further questions or need assistance, feel free to reach out. If you think it could be a defective unit, reach out, and we will work with Minelab to get it replaced for you.

Thank you for being such a loyal supporter of History Seekers.