Description
Gold that other detectors walk over is still in the ground. Match-head nuggets, flakes in bedrock cracks, the pickers left behind in a patch everyone calls hunted out: that is the gold the Fisher Gold Bug 2 was built for, and this 6.5 in (16.5 cm) elliptical coil version is the configuration that hears the smallest of it. Fisher's own manual calls it "the standard against which all other gold prospecting detectors are compared," and thirty years of goldfield results back that line up.
At a glance
The Fisher Gold Bug 2 with the 6.5 in (16.5 cm) elliptical coil is a 71 kHz VLF gold prospecting metal detector with three modes (Normal, Boost, Iron Discrimination), three mineralization settings, manual ground balance with a three-digit readout, and a threshold hum. 2.9 lb (1.3 kg), two 9V batteries, waterproof coil, hip-mountable control housing. Made in the USA. 2-year Fisher warranty. Final sale.
Why the 6.5 in coil
Coil size on a gold machine is a trade, and the trade is simple: the smaller the coil, the hotter it runs on tiny gold and the better it fits where gold hides. The 6.5 in (16.5 cm) elliptical is the Gold Bug 2's small-gold specialist. It slides between boulders, works the inside of a bedrock crevice, and separates a flake from the hot rock beside it where a wider coil would average them together. Pair that footprint with a 71 kHz operating frequency, among the highest ever built into a VLF detector, and you have the configuration prospectors reach for when the gold is small and the ground is tight: dredge tailings, hydraulic cuts, drywash cobbles, bedrock after a flood.
Choose this version over the 10 in (25 cm) coil when precision beats coverage. Choose the two-coil Combo when you want both and plan to swap by site. The coil on this listing is the one Fisher's spec table lists as a standard option alongside the 10 in, and the 14 in (36 cm) is the accessory coil for open ground.
The controls, and what they are for
The Gold Bug 2 is an analog, knob-driven machine, and every knob earns its place. Hunt in Normal mode, an all-metal auto-tune with fast retune. Switch to Boost when you want the faint signals amplified: Boost raises quiet, deep, small targets above volume 7 while loud shallow targets stay the same, which is why it is the mode for small deep nuggets. Use Iron Discrimination as a check, not a hunting mode: a quick press of the MODE button drops the threshold hum, ignores hot rocks and ferrous trash, and gives a sharp response on good targets, and the manual is honest that faint small or deep nuggets can be ignored in Disc, so hunt in Normal or Boost and check in Disc.
The Mineralization switch (Low, Normal, High) changes gain and retune speed together. Start on Low; its slow retune and high gain suit small deep nuggets in quiet ground. Black sand usually wants High. The Ground Reject knob carries a three-digit readout that defaults to 75.0 and returns there on a press-and-hold, and the manual's bob-the-coil procedure (lower from about 6 in to 1 in and listen for the pitch change) sets it in under a minute. Threshold sets the faint background hum you listen through; Volume is the power switch; Sens runs the gain, and the manual's rule is not to drop it below 5 before raising Mineralization instead. Two things the manual teaches that no dealer page does: your own hand can be a target (keep it off the coil, use the sprinkle method to test), and a nail beeps twice swept end to end and once crosswise, a free iron tell with Disc off.
Technical specs and what they mean in the field
| Spec (Fisher manual MGB2-2 and firsttexasproducts.com) | What it does in the field |
|---|---|
| 71 kHz VLF operating frequency | Among the highest of any VLF detector: maximum sensitivity to small, low-conductive targets, which is exactly what tiny gold is. |
| 6.5 in (16.5 cm) elliptical search coil, waterproof, 7 ft (2.1 m) cable | Fits crevices and cobbles, separates small targets, wades a creek; the long cable lets the housing ride on your belt. |
| Modes: Normal, Boost, Iron Discrimination | Hunt in Normal or Boost; Boost lifts faint deep signals; Disc checks a target for iron before you dig. |
| Mineralization: Low, Normal, High | Matches gain and retune speed to the ground, from quiet soil to black sand. |
| Manual ground balance (Ground Reject knob, 3-digit readout, default 75.0) | You set it to the ground under the coil; press and hold to return to the default. |
| Threshold, Sens and Volume knobs; backlight button | A threshold hum you listen through is how a VLF gold machine reports the faintest targets; backlight for dawn starts. |
| Audio only: no target ID, no depth readout | You learn targets by sound; there is no number to misread, and nothing to distract from a whisper of a signal. |
| Two 9V batteries (drop-in compartments) | Fisher's spec table lists 25 to 35 hours on alkaline; the manual favors lithium for the longest run. |
| 1/4 in (6.35 mm) headphone jack with tethered seal | Headphones are not included; Fisher recommends always wearing them to hear the faintest gold. |
| Weight 2.9 lb (1.3 kg) complete; housing 1.0 lb (0.45 kg) removable for hip mount | Belt-mount the housing and the shaft swings at under 2 lb (0.9 kg) all day. |
| Length 53 in (135 cm) extended, 40 in (102 cm) collapsed | Packs into a vehicle or a daypack; fiberglass-reinforced nylon lower stem, aluminum upper and middle. |
| Control housing dust and moisture resistant (not waterproof) | Coil in the water, housing out of it; shallow-water work means the housing in a sealed bag on your chest. |
| 2-year Fisher warranty | Covered by First Texas Products, El Paso, Texas, where the machine is made. |
Gold Bug 2 6.5 in, 10 in, Combo, or Gold Bug Pro: which one do you need?
| Configuration | Coil(s) in the box | Best for |
|---|---|---|
| Gold Bug 2 with 6.5 in coil (this listing) | 6.5 in (16.5 cm) elliptical | The smallest gold in the tightest ground: bedrock, tailings, cobbles, worked patches. |
| Gold Bug 2 with 10 in coil | 10 in (25 cm) elliptical | More coverage per sweep and more depth on larger nuggets in open ground. |
| Gold Bug 2 Combo | Both 6.5 in and 10 in | One machine, both jobs; swap by site in a minute. |
| Gold Bug 2 Gold Kit (History Seekers pack) | Both coils plus a Fisher F-Pulse pinpointer | The complete nugget-recovery setup in one order. |
| Fisher Gold Bug Pro | 19 kHz, computerized Ground Grab balance, numeric target ID | The prospector who also wants coins and relics and a display to read; a different machine, not a Gold Bug 2 variant. |
The Gold Bug 2 and the Gold Bug Pro share a name and nothing else that matters: the 2 is a 71 kHz, manual-balance, audio-only nugget specialist; the Pro is a 19 kHz machine with automatic ground balance and a target ID number. If gold is the point, this page is the machine. Everything that fits it, including the 10 in and 14 in coils, is on our Gold Bug 2 coils and accessories page.
Know before you buy
There is no target ID and no depth readout: this is an audio machine, and that is a feature for small gold, not an omission. Ground balance is manual, which takes a minute to learn and then becomes the reason the machine stays quiet in ground that makes automatic detectors chatter. Headphones are not in the box; Fisher recommends always wearing them. The housing is moisture resistant, not waterproof, so only the coil goes in the water. Iron Discrimination is a check, not a guarantee: big iron can pass and faint small gold can be lost in Disc, which is why the manual says hunt in Normal or Boost. The machine is sensitive to electrical interference and to your own hand near the coil. And one thing to know if you add coils later: Fisher changed the Gold Bug 2 coil connector on units built from July 2026, so replacement coils for a new-generation unit carry the -5P part numbers; call us with your serial or purchase date and we will match the right coil. As a gold-prospecting detector, the Gold Bug 2 is a final-sale item under our refund policy, so call 256-284-2247 with any question before you buy.
What comes in the box
- Fisher Gold Bug 2 detector with the control housing (removable for hip mount, belt loops included)
- 6.5 in (16.5 cm) elliptical waterproof search coil with 7 ft (2.1 m) cable
- Fisher Gold Bug 2 operating manual
- 2-year Fisher warranty (First Texas Products)
Batteries (two 9V) and headphones are not included. Our Gold Bug 2 Gold Kit is the pack for a buyer who wants both coils and a pinpointer in one order.
Frequently Asked Questions
Why choose the Gold Bug 2 with the 6.5 in coil instead of the 10 in coil?
The 6.5 in (16.5 cm) elliptical is the small-gold and tight-ground coil: it fits bedrock crevices and cobbles, separates a flake from the hot rock next to it, and runs hottest on the tiniest nuggets. The 10 in (25 cm) elliptical covers more ground per sweep and reaches deeper on larger gold in open patches. Prospectors who hunt both kinds of ground buy the two-coil Combo and swap by site.
Why is the Gold Bug 2's 71 kHz frequency special?
71 kHz is among the highest operating frequencies ever built into a VLF detector. High frequency means high sensitivity to small, low-conductive targets, and tiny gold nuggets are exactly that. It is the reason the Gold Bug 2 has stayed in serious prospecting kits for decades alongside far newer machines.
Does the Gold Bug 2 have a target ID or automatic ground balance?
No to both. It is an audio machine with a threshold hum, a manual Ground Reject knob with a three-digit readout (default 75.0), and three modes: Normal, Boost, and Iron Discrimination. You learn targets by sound and set the ground balance yourself with the bob-the-coil procedure in the manual. The Fisher Gold Bug Pro is the family machine with automatic Ground Grab balance and a numeric target ID.
Is the Gold Bug 2 waterproof?
The search coil is waterproof and can work a creek or a wet wash. The control housing is dust and moisture resistant only, not waterproof, and must stay out of the water; for shallow-water hunting the manual suggests the housing in a sealed bag on your chest.
What batteries does the Gold Bug 2 use, and are headphones included?
Two 9V batteries in drop-in compartments; Fisher's spec table lists 25 to 35 hours on alkaline, and the manual notes lithium cells run longest. Headphones are not included on any Gold Bug 2 configuration except the Combo 2 variant, and Fisher recommends always wearing them because the faintest gold signals are easy to miss on the speaker. The jack is 1/4 in (6.35 mm).
Gold Bug 2 or Gold Bug Pro?
Different machines. The Gold Bug 2 is a 71 kHz, manual-ground-balance, audio-only nugget specialist with Boost mode for faint deep gold. The Gold Bug Pro is a 19 kHz machine with computerized Ground Grab ground balance and a numeric target ID, better for the prospector who also wants coins and relics. For small gold in mineralized ground, the Gold Bug 2 is the one.
Can the Fisher Gold Bug 2 find gold, and how small?
Finding gold is its whole job, and small gold is its specialty: at 71 kHz the Gold Bug 2 hears match-head nuggets, flakes and pickers that lower-frequency detectors walk over, and the 6.5 in (16.5 cm) coil runs hottest of all on the tiniest pieces. It will hit gold rings and jewelry anywhere, and the manual notes it can coin-shoot with Iron Discrimination filtering the trash, but it was designed for prospecting, and worked-out patches where only the small and deep gold remains are its home ground. Fisher publishes no depth rating; depth depends on the nugget, the ground and the coil.
Can I return the Gold Bug 2, and what warranty does it carry?
Gold-prospecting detectors are sold as final sale and are not eligible for return, opened or unopened, so call 256-284-2247 with any question before you buy. History Seekers Metal Detectors is an authorized Fisher dealer; every Gold Bug 2 we sell is new, made in the USA by First Texas Products, and carries the full 2-year Fisher warranty.
Who you are buying from
History Seekers is a small American business and a working detecting channel: over 1.1 million people follow our hunts on Facebook and YouTube. Everyone here detects, from the top down: gold, relics, coins, jewelry, even float copper. We hunt gold ourselves in Alabama, North Carolina and Alaska, and the person who answers your call has set a Ground Reject knob in real goldfield dirt. Every purchase keeps everyday Americans working.
History Seekers Metal Detectors is an authorized Fisher dealer; every Gold Bug 2 we sell is new, made in the USA, and carries the full 2-year Fisher warranty. Call 256-284-2247 before you buy if you are deciding between the 6.5 in coil, the 10 in coil, and the Combo; we will tell you straight which one fits your ground. Because at History Seekers, the story is more important than the artifact.
See everything that fits your machine:What Fits the Fisher Gold Bug 2




