Description
History Seekers Metal Detectors is an authorized Minelab dealer; every Gold Monster 2000 we sell is new, ships from Minelab's authorized US distributor, and carries the full 2-year Minelab warranty.
At a glance
The Minelab Gold Monster 2000 is a fully automatic gold metal detector running Multi-Au 12 to 76 kHz simultaneous multi-frequency with Echo Wave audio and 0 to 99 Target IDs. Weight: 2.75 lb (1.25 kg) with battery and 5 in (13 cm) coil. Coil waterproof to 3.3 ft (1 m); pod rainproof. Two Li-ion batteries included. 2 year warranty.
The gold that is left is small. This machine was built for it.
Most gold country has been hunted for over a century, and what remains is sub-gram gold in red, mineralized dirt that coin machines never hear. The detectors that can hear it have traditionally demanded constant ground balancing and years of tone experience. That is the exact problem the Gold Monster 2000 solves: sensitivity to gold Minelab rates at below 0.01 grams, running fully automatically from the moment you switch it on. If you are weighing a Minelab gold detector and your real question is which one you need, the answer is on this page in plain words, with the spec table and the honest limits to back it up.
Multi-Au Technology: flagship sensitivity, switch-on simplicity
Minelab's own manual describes the Gold Monster 2000 as the machine that bridges the gap between single-frequency VLF gold detectors and the higher-performance gold machines, and that is exactly how it hunts. Multi-Au Technology runs simultaneous frequencies from 12 to 76 kHz; Minelab bills it as VLF sensitivity paired with a "Pulse Induction soil-handling engine," which in practice means signal processing inspired by pulse induction, not a PI transmitter. The payoff is a dedicated gold nugget detector that stays stable at high sensitivity in mineralized and even salt-conductive ground while hearing ultra-fine gold. And it does all of that with the same switch-on-and-go automation that made the Gold Monster 1000 famous. We know, because our team runs both.
Amber's next chapter, and Heath's drift-mine gold
If you read our Gold Monster 1000 listing, you know Amber from the History Seekers team: completely new to gold detecting, a 10 minute lesson at the AKAU Gold Camp in Nome, Alaska, 9 pieces of gold in her first hour, and 118 pieces by the end of the trip. Amber is now learning the Gold Monster 2000, and it is already producing: she found a 0.4 gram piece of gold at an LDMA claim in Stanton, Arizona. She points to how friendly both machines are to a new user, and the 2000 is where her gold fever is headed next. Heath, the owner of History Seekers, hunts with it too: he found a 0.25 gram piece of gold with the Gold Monster 2000 at the LDMA Duisenburg, California camp while the crew excavated a drift mine from the 1860s. Two real finders, four real finds, one machine family. That is the kind of proof a spec sheet cannot give you.
Why the Gold Monster 2000 over the Gold Monster 1000
The 2000 keeps everything that makes the 1000 the beginner's gold machine and adds the layer serious hunters asked for. Real Target ID numbers from 0 to 99 join the Gold Chance Indicator, so you get a conductivity read most dedicated gold machines simply do not offer. Echo Wave audio plays two layers at once: the sensitive threshold detection audio and discrimination tones, high for gold, low for hot rocks and iron, with no loss of detection depth. Three Ground Types tune it to your dirt, and here is the detail nobody else will tell you: the Benign setting performs similarly to the Gold Monster 1000, so the 1000's behavior is effectively included as one of the 2000's three settings. Difficult, the default, stays stable at maximum sensitivity in almost any soil, with the best hot-rock rejection and the lowest response to charcoal. One more engineering detail from the manual: the battery voltage is regulated, so performance stays constant as the charge drains instead of fading at the end of the day. You will read elsewhere that budget and ground should decide between the two, and that is fair as far as it goes. What settles it for most buyers is direction: the 2000 contains the 1000's behavior and adds the numbers, while a 1000 can never be upgraded into a 2000. If the Gold Monster 1000 vs 2000 question is really "do I want a Target ID number on a gold machine," you want the 2000.
Gold Monster 2000, SDC 2300 or GPX 6000: which Minelab gold detector do you need?
Minelab's current gold line below the GPZ flagships is three machines, and they overlap less than the names suggest. Choose the Gold Monster 2000 for small, shallow gold in mineralized ground when you want a detector that reads out a Target ID number, flags iron with a low tone, weighs 2.75 lb (1.25 kg) and runs automatically; it is the only one of the three with numeric Target IDs and a depth indicator, and it is lighter than the other two by about 2 lb (0.9 kg) or more. Choose the SDC 2300 when the whole detector has to go under water: it is a pulse induction machine waterproof to 10 ft (3 m), folds to 15.7 in (40 cm), swings an 8 in (20 cm) round Monoloop coil, weighs 5.1 lb (2.3 kg), and gives continuous-tone audio with no numeric Target ID. Choose the GPX 6000 for gold of all sizes at depth: GeoSense-PI, two coils in the box (a 14 in (36 cm) Double-D and an 11 in (28 cm) Monoloop), Bluetooth audio with ML 100 wireless headphones, 4.6 lb (2.1 kg), coils waterproof to 3.3 ft (1 m) with a splash and rain proof detector. For many serious hunters the choice is not either-or: the Gold Monster rides in the truck next to a GPX for crevice work and for the small pieces a big PI coil swings past.
Where it earns its keep: bedrock, creeks, salt ground, remote camps
Exposed bedrock is the classic Gold Monster hunt: the 5 in (13 cm) coil drops into cracks a big coil bridges, and Echo Wave's low tone tells you a crack holds a hot rock before you pry it open. In a flowing creek the coil can go under to 3.3 ft (1 m) while the control pod stays above the water line. Salt-conductive ground, the kind that drives single-frequency gold machines into chatter, is exactly what the Difficult Ground Type exists for; the manual adds that Difficult also has the lowest response to charcoal and the least sensitivity to your own body's charge when you hand-wave a test nugget over the coil. At a remote camp the second battery and the 12 V clip cable make the truck your charger: about 3.5 hours to charge a pack, about 8 hours of run time from it.
The 10 in (25 cm) coil option: the GM 10
Covering wide-open ground? Minelab makes a genuine Gold Monster 2000 10 inch coil (25 cm): the GM 10 search coil (part 3011-0527), a 10 x 6 in (25 x 15 cm) Double-D elliptical that trades a little of the 5 in (13 cm) coil's tiny-gold focus for more coverage per swing. One compatibility fact matters here, and most dealers never mention it: the GM 10 fits the Gold Monster 2000 only, and Gold Monster 1000 coils never fit the Gold Monster 2000. The 1000-era 10 in (25 cm) coil is a different part (3011-0336) and does not interchange. We carry the correct part, so you never have to guess. Every accessory with verified fitment for this machine, coils, charger and gold gear, is on our What Fits the Gold Monster 2000 page.
Straight pricing from an authorized Minelab dealer
Minelab sets a minimum advertised price for the Gold Monster 2000 that every authorized dealer must honor, so the floor under any legitimate Gold Monster 2000 price is the same; what differs is who answers the phone and whether they have swung one. Every Gold Monster 2000 for sale on this page is the genuine US-market version, sold by an authorized Minelab dealer whose orders ship from Minelab's authorized US distributor with the full 2-year Minelab warranty. If you are searching for a Minelab Gold Monster 2000 USA dealer, that is exactly what History Seekers is. Active and retired military: a 15% military discount exists on Minelab detectors. Call us at 256-284-2247 for details and to order with the discount; it cannot be combined with other promotions, including the free magazine subscription below. We also price match: call or contact us with the competitor's current listing so we can verify it.
Exclusive History Seekers bonus: free with every Minelab Gold Monster 2000
Buy your Minelab Gold Monster 2000 from History Seekers and receive a free 1-year subscription to American Digger Magazine, the definitive print resource for relic hunters, coin shooters, and serious diggers. Real finds, real research, and real history delivered directly to your door. This bonus is available exclusively through HistorySeekers.net.
Notice: the free subscription offer applies strictly to listed prices. It cannot be combined with other discount codes or promotions. If a coupon or promotional discount is used at checkout, the free magazine subscription is excluded.
What is in the box
Gold Monster 2000 detector with GM2000-05 5 in (13 cm) round Double-D search coil, TWO rechargeable 2700 mAh Li-ion batteries, universal AC charging cable, a car battery charger cable that clips straight onto a 12 V vehicle battery for remote-camp charging, wired 1/8 in (3.5 mm) earbuds, universal shaft adapter, and the Getting Started Guide.
Specifications
| Feature | Minelab Gold Monster 2000 |
|---|---|
| Technology | Multi-Au simultaneous multi-frequency (12 to 76 kHz) with PI-inspired signal processing; Echo Wave audio |
| Ground Types | Difficult (default), Normal, Benign (performs similarly to the Gold Monster 1000) |
| Ground balance | Easy-Trak automatic or Quick-Trak manual; automatic noise cancel at start-up |
| Sensitivity | Manual 1 to 10, Auto 1, Auto 2 |
| Factory defaults | Ground Type Difficult, Sensitivity Auto 2, Echo Wave on |
| Target information | Target IDs 0 to 99, Gold Chance Indicator, 25 discrimination segments, ferrous volume (10 levels), depth indicator (5 levels) |
| Audio | Echo Wave dual-layer (high tones = gold, low tones = hot rocks/iron); internal speaker or wired 1/8 in (3.5 mm) earbuds (included); 12 volume levels |
| Search coil | GM2000-05 5 in (13 cm) round Double-D, waterproof to 3.3 ft (1 m); optional GM 10 10 x 6 in (25 x 15 cm) elliptical (part 3011-0527) |
| Control pod | IP55 rainproof, monochrome LCD |
| Weight | 2.75 lb (1.25 kg) with battery and 5 in (13 cm) coil |
| Length | Telescopic 25.6 to 54.4 in (65 to 138.2 cm), carbon fiber and fiberglass shaft |
| Operating temperature | 32 to 158 F (0 to 70 C); storage -4 to 176 F (-20 to 80 C) |
| Batteries | Two 2700 mAh Li-ion included; approx. 8 hours each, approx. 3.5 hour charge; 12 V car battery clip cable included |
| Software | Field-updatable via USB charging/data cable |
| Warranty | 2 years, control box and coil |
Know before you buy
The control pod is IP55 rainproof, not submersible; only the coil takes water, to 3.3 ft (1 m). Audio is wired: the internal speaker or the included earbuds, no wireless. Unlike the Gold Monster 1000 there is no AA battery fallback, and the power plan is the two included Li-ion packs, which the 12 V clip cable can recharge off a truck battery in the field. Minelab publishes no depth figure for this machine and neither do we; depth depends on nugget size, shape, orientation and ground, and this detector's strength is small, shallow gold rather than big gold at depth, which is pulse induction territory. The software is updatable over USB, so the machine can grow with Minelab's releases.
Frequently Asked Questions
What is the difference between the Gold Monster 2000 and the Gold Monster 1000?
The GM2000 adds the Multi-Au simultaneous multi-frequency engine (12-76 kHz) with PI-inspired signal processing, Echo Wave audio, a 0-99 Target ID with Gold Chance Indicator, and automatic noise cancel. The GM1000 is the proven single-frequency 45 kHz VLF platform. The 2000's Benign Ground Type performs similarly to the Gold Monster 1000, so the 1000's behavior is effectively included as one of the 2000's three settings.
Gold Monster 2000, SDC 2300 or GPX 6000: which one do I need?
Gold Monster 2000 for small, shallow gold in mineralized ground when you want numeric Target IDs, iron discrimination, automatic operation and the lightest machine of the three at 2.75 lb (1.25 kg). SDC 2300 when the whole detector must go under water: pulse induction, waterproof to 10 ft (3 m), 8 in (20 cm) Monoloop coil, 5.1 lb (2.3 kg), continuous-tone audio with no numeric Target ID. GPX 6000 for larger gold at depth in any ground: GeoSense-PI with a 14 in (36 cm) Double-D and an 11 in (28 cm) Monoloop coil in the box, 4.6 lb (2.1 kg), coils waterproof to 3.3 ft (1 m), detector splash and rain proof. The Gold Monster 2000 is the only one of the three with Target ID numbers.
Is the Gold Monster 2000 waterproof?
The coil is waterproof to 1 m (3.3 ft); the control pod is IP55 rainproof, not submersible. Fine for creeks, wet grass, and rain, not for diving. If the whole detector has to go under, the SDC 2300 is the Minelab gold machine built for that.
Is there a 10 inch coil for the Gold Monster 2000?
Yes. The GM 10 search coil (Minelab part 3011-0527) is a 10 x 6 in (25 x 15 cm) Double-D elliptical coil made for the Gold Monster 2000, and it fits the Gold Monster 2000 only. Gold Monster 1000 coils never fit the Gold Monster 2000: the 1000-era 10 in (25 cm) coil is a different part (3011-0336) and does not interchange.
Can the Gold Monster 2000 find gold in heavily mineralized ground?
Yes, that is the ground it was built for. Any metal detector will find gold rings and jewelry; tiny nuggets in iron-rich soil are the real test, and the Gold Monster 2000 passes it with Multi-Au simultaneous multi-frequency sensitivity Minelab rates at below 0.01 grams, running fully automatically without the constant manual ground balancing older machines demand. When targets run deeper than this class allows, pulse induction takes over: the GPX 6000 is the natural next step.
How do I set up the Gold Monster 2000 for a first hunt?
Switch it on and go. The factory defaults are Ground Type Difficult, Sensitivity Auto 2 and Echo Wave on; noise cancel runs automatically at start-up and Easy-Trak tracks the ground as you swing. Press Quick-Trak when you move onto hot rocks or sharply different ground. If the ground is chattery, try the other Auto level or a manual sensitivity setting, and try Normal in mineralized ground that has no salt. Benign behaves like the Gold Monster 1000 and reverts to the default when you power off. To return every setting to factory, hold the power button for about 7 seconds until FP shows on the display.
Why buy the Gold Monster 2000 from History Seekers?
History Seekers Metal Detectors is an authorized Minelab dealer; every Gold Monster 2000 we sell is new, ships from Minelab's authorized US distributor, and carries the full 2-year Minelab warranty. History Seekers is a small American business where everyone detects, top down, for gold, relics, coins, and jewelry; years of field experience is a hiring requirement, not a coincidence. Our own team hunts this machine: Amber found a 0.4 gram piece of gold with the Gold Monster 2000 at an LDMA claim in Stanton, Arizona, and owner Heath found a 0.25 gram piece at the LDMA Duisenburg, California camp while excavating an 1860s drift mine. The person who answers your questions may be the same one processing your order. Every purchase keeps everyday Americans working.
Who you are buying from
History Seekers is a small American business and a working detecting channel: over 1.1 million people follow our hunts on Facebook and YouTube. Everyone here detects, from the top down: gold, relics, coins, jewelry, even float copper. Years of field experience is a hiring requirement, not a coincidence, and the person who answers your questions may be the same one processing your order. Every purchase keeps everyday Americans working.
The story is more important than the artifact.
See everything that fits your machine:What Fits the Minelab Gold Monster 2000 · What Fits the Minelab Gold Monster 1000









